Business

A repair and maintenance fund for your shop: how to build one

Build a repair fund for your shop: pick a small monthly set-aside, keep it separate and decide in advance what it can pay for, worked at ₹1,500.

Editorial illustration for A repair and maintenance fund for your shop: how to build one

A repair fund is a small, fixed amount you set aside every month in a separate place, so that a broken fridge compressor or a stuck shutter does not hit your working cash. Choose an amount you will not miss, decide what the money may be used for, and refill it after each repair. At ₹1,500 a month, you put away ₹18,000 a year.

How much should you set aside?

Start from your own history. Say last year you spent ₹4,200 on a fan and wiring, ₹7,800 on a freezer repair and ₹3,000 on the shutter. That is 4,200 + 7,800 + 3,000 = ₹15,000, or ₹1,250 a month (15,000 / 12). Round up to ₹1,500 for a little room.

If you have no history, begin with an amount that does not strain the month and review it after six months. A small habit that continues is better than a big one that stops.

Where do you keep it?

  • A separate bank account or a clearly labelled pot, not mixed with daily cash.
  • A transfer on a fixed date, such as the 1st or the day after rent, so it is done before the money is spent elsewhere.
  • A simple book or sheet showing money in, money out and balance.

The aim is to make it a little inconvenient to touch for other reasons.

What may the fund pay for?

Write the rule down before an emergency, because in the moment almost anything feels urgent.

AllowedNot allowed
Fridge or freezer repairBuying stock
Shutter, lock or door repairPaying wages or rent
Wiring, switches, lightsPersonal or family expenses
Weighing scale or billing machine repairNew shop fittings that are upgrades

Replacement of old equipment can go either way. Decide whether you count it as repair or as a larger purchase for which you save separately.

What does a year look like?

Say you put in ₹1,500 every month and pay ₹9,000 for a compressor in month 7. After seven months the pot holds 7 x 1,500 = ₹10,500. After the repair it holds 10,500 - 9,000 = ₹1,500. Five more months of saving add 5 x 1,500 = ₹7,500, so you end the year with 1,500 + 7,500 = ₹9,000.

Point in the year (made-up)Put in so farSpentBalance
Month 6₹9,000₹0₹9,000
Month 7, after repair₹10,500₹9,000₹1,500
Month 12₹18,000₹9,000₹9,000

What do you do after a big repair?

Keep the monthly amount the same and let the pot rebuild. If a repair empties the fund and a second one arrives soon, you will need to cover it from working cash. Do not stop the monthly amount just because the pot is low; that is when you need it most.

When is it big enough?

Pick a target, such as the cost of your most expensive likely repair. When the balance reaches it, you can pause the monthly amount, or lower it, and start again as soon as you use some. Review the amount every year when your equipment gets older.

Who decides when to draw from it?

If staff or family also work in the shop, agree who may approve a draw. For small amounts, say up to ₹1,000, the person on duty may call a mechanic; above that, the owner decides. A simple rule like this stops quick fixes that cost more than they save, and it means nobody has to wonder whether the fund was used properly.

A quick start

  1. Add up last year's repair bills, or estimate from memory if you have no bills.
  2. Divide by 12 and round up to a figure you can afford.
  3. Open a separate pot and set the transfer date.
  4. Write the allowed and not-allowed list on the first page of your book.
  5. Photograph and file each repair bill from now on.

Repair bills and receipts can be kept with the matching transaction in SpendixAI, so a past repair is easy to find later.

SPENDIXAI JOURNAL

Useful ideas start with a clearer picture of your own spending.

Explore your reports