Credit utilisation is the share of a card's limit that is in use: balance divided by limit, multiplied by 100. Track it by writing each card's limit and statement balance side by side every month. How much it affects a credit score is decided by the bureaus and lenders, so check their own explanations rather than relying on a rule of thumb.
What exactly are you tracking?
Two numbers per card: the limit your issuer gave you and the balance reported on your statement. Everything else is arithmetic. A salaried person with two or three cards can lose sight of which one carries the most, particularly when a large annual purchase, such as a flight or a phone, lands on one.
The statement date matters because the balance on that date is the figure many people look at. You can read yours on the statement.
A worked example with three cards
Say these are your statement balances this month. All numbers are hypothetical.
| Card | Limit (₹) | Statement balance (₹) | Utilisation |
|---|---|---|---|
| Card A | 1,50,000 | 90,000 | 60% |
| Card B | 80,000 | 16,000 | 20% |
| Card C | 50,000 | 5,000 | 10% |
Card A: 90,000 divided by 1,50,000 is 0.6, so 60%. Card B: 16,000 divided by 80,000 is 0.2, so 20%. Card C: 5,000 divided by 50,000 is 0.1, so 10%. Across all cards the limits total 2,80,000 and the balances 1,11,000, which is 1,11,000 divided by 2,80,000, about 39.6%. Notice that the single highest card, A, is far above the average. The average hides the problem.
What do you do when one card creeps high?
- Write down each limit and each statement balance in one table.
- Calculate per-card utilisation and the overall figure.
- Find the card with the highest percentage; ask which purchases drove it.
- If you can, pay part of the balance before the statement date, so the reported figure is lower. Check your own card's cycle to see when that is.
- Move a planned big purchase across cards, or split it, only if it does not tempt you to spend more.
Can SpendixAI keep limits and cycle days?
SpendixAI accounts store a credit limit and a cycle day for each card, so the limit sits next to that card's spend. You upload card statements as PDF, CSV or Excel, and review rows before saving. It will not calculate or predict a credit score, and it does not read SMS or connect to banks. Utilisation arithmetic stays simple enough to do by hand.
What does a high month-end figure mean for you?
A high percentage on one statement does not by itself tell you anything is wrong. A flight booked early or an annual insurance premium put on a card can push one month up, and it falls again after payment. What deserves attention is a pattern: a card that is high every month, or one where the balance rises while you only pay the minimum. Track six months in a row before drawing any conclusion, and note the cause beside each high month.
If your card statement reports a balance after you have already paid it, the figure still stands for that cycle. Read the statement's own dates carefully, and use the cycle day you stored for each card as the anchor for your monthly check.
Monthly checklist
- Limit and statement balance for each card.
- Per-card percentage and overall.
- Largest single purchase this cycle.
- Next statement date and due date.
- Anything to pay down before the cycle closes.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

