Fuel for a road trip is distance divided by mileage, multiplied by the price per litre. Add an uplift for luggage and the air conditioner, and an allowance for driving around at the destination. For a hypothetical 1,200 km round trip the answer comes to about ₹8,583, and the steps below let you redo it with your car.
What is the basic formula?
Fuel cost = distance / mileage x price per litre. In a sheet, with distance in B1, mileage in B2 and price in B3: =B1/B2*B3. Use the mileage you actually get on the highway, not the figure from the brochure.
How do I find my real mileage?
- Fill the tank to the first click of the nozzle and reset the trip meter.
- Drive as normal for a few hundred kilometres.
- Refill to the same point and note the litres added.
- Divide the kilometres driven by the litres: that is your mileage.
Say you drove 420 km and the refill took 24 litres. Then 420 / 24 = 17.5 km/l. Do it on a highway stretch for a highway number and in the city for the city one.
What does a worked example look like?
All numbers are made up. The round trip is 1,200 km, highway mileage is 18 km/l and petrol costs ₹100 a litre.
| Step | Working | Result |
|---|---|---|
| Base fuel | 1,200 / 18 = 66.67 litres, x ₹100 | ₹6,667 |
| Fuel with a 10% uplift for luggage and AC | 66.67 x 1.10 = 73.33 litres, x ₹100 | ₹7,333 |
| Local driving at destination | 150 km / 12 km/l = 12.5 litres, x ₹100 | ₹1,250 |
| Total estimate | ₹7,333 + ₹1,250 | ₹8,583 |
The 10% uplift is a guess. A full boot and a car with the air conditioner running all day will burn more than a lightly loaded one, so use a higher figure for hilly roads and a lower one for a flat, empty highway.
Which price do I use?
Use the price at your local pump on the day you plan, and add a small cushion for a change during the trip. Fuel prices differ between cities and states, so a long route may pass through several. If you can, check the price at one or two stops along the way. Keep the estimate in a simple range: low, expected and high.
What else changes fuel use?
- Speed: driving faster generally burns more fuel per km.
- Hills and traffic: stop-start and climbs increase consumption.
- Tyre pressure: low pressure raises consumption, so check it before leaving.
- Detours: add 5 to 10 percent to distance for wrong turns and sightseeing.
- Idling: a long wait with the engine on adds litres with no km.
Finally, compare a range, not a point. Run the formula with a low mileage of 16 km/l, an expected 18 and a high of 20. For 1,200 km that is 75 litres, 66.7 litres and 60 litres, so ₹7,500, ₹6,667 and ₹6,000 before the uplift. The spread of ₹1,500 is a better planning figure than one exact number, and it tells you how much your assumption about mileage matters.
How do I check my estimate afterwards?
Keep each fuel receipt and note the litres and the odometer reading at every fill. After the trip, total the rupees and compare with your estimate; the difference is what to correct next time. If your fuel payments are on a bank or card statement, SpendixAI can bring those rows in so you only need to add the odometer reading yourself.
- Calculate with your own mileage and the local price.
- Add your uplift and local-driving allowance.
- Round up to a number you are comfortable with.
- Log every fill during the trip.
- Replace your uplift with the real figure for next time.
Useful ideas start with a clearer picture of your own spending.
Explore your reports


