For each home medical device, keep one record with the device, model, date and price, where the bill is, the warranty length and end date, and a short list of consumables such as batteries, cuffs, masks or filters with their replacement interval and cost. Then a warranty claim or a replacement is a lookup, not a hunt.
Why a device needs more than a bill
A blood pressure monitor, a nebuliser or a pulse oximeter is a one-off purchase that keeps costing money. Batteries run down, a mask or filter wears out, a cuff cracks. And when something fails, you need the bill and the warranty card in the same minute. Most households find them in separate drawers, or not at all.
What to record
- Device and model, and who uses it
- Purchase date, shop and price
- Bill: photographed and stored with the record
- Warranty period in months, and the end date
- Photo of the warranty card and serial number
- Consumables: item, cost, and how often it needs replacing according to the maker's manual
- Date the device next needs attention
Read the manual for care and replacement intervals, and take the numbers from there rather than from guesswork. If the manual is lost, ask the shop or the maker's service line.
A worked example
Say a household buys three devices. All prices and intervals are invented for the example.
| Device | Bought on | Price (Rs) | Warranty | Warranty ends | Consumable and yearly cost (Rs) |
|---|---|---|---|---|---|
| BP monitor | 10 Jan 2026 | 1,900 | 24 months | 10 Jan 2028 | Batteries 120 twice a year: 240 |
| Nebuliser | 15 Mar 2026 | 2,400 | 12 months | 15 Mar 2027 | Mask kit 350 four times a year: 1,400 |
| Pulse oximeter | 2 Jun 2026 | 1,100 | 12 months | 2 Jun 2027 | Batteries 80 three times a year: 240 |
The three purchases total 1,900 + 2,400 + 1,100 = ₹5,400. The running cost for consumables in a year is 240 + 1,400 + 240 = ₹1,880. So the first-year cost of the three devices is 5,400 + 1,880 = ₹7,280. The nebuliser looks cheap to buy but is the most expensive to keep going in this example, which is a good reason to record the consumables.
How do I calculate warranty dates and costs?
With purchase date in column B, warranty months in D, price in C, and replacement cost and count per year in F and G:
- Warranty end date in E2: =EDATE(B2, D2)
- Yearly consumable cost in H2: =F2*G2
- First-year cost in I2: =C2+H2
- Days left on the warranty in J2: =E2-TODAY()
EDATE moves a date forward by whole months and works in Excel and Google Sheets. Format the end date as a date, otherwise you will see a number. A negative figure in the last column means the warranty has ended.
Where do I put the purchase in my categories?
Use a Health sub-category such as Equipment, and keep the consumables in a separate Supplies sub-category so recurring costs do not hide in a one-off. In SpendixAI, a payment from your statement can carry the bill with it, and cash purchases can be added by hand. You can look back at the Equipment total over a year and see what you have set up at home.
What about reimbursement?
Whether any of these purchases can be reimbursed by an employer or insurer depends on their rules, which vary and change. If you plan to ask, keep the original bill, find out the rules in writing first, and file the paperwork before you throw anything away.
Calendar reminders
- Set a reminder one month before each warranty ends, to test the device and raise any fault.
- Set reminders for consumable changes at the interval in the manual.
- Re-check the readings or accuracy only as your doctor advises.
Useful ideas start with a clearer picture of your own spending.
Explore your reports


