Expense categories

How to track geyser repair month by month

Keep a repair log for your geyser, set aside a small monthly amount, and use the running total to decide when repairing stops making sense.

Editorial illustration for How to track geyser repair month by month

To track geyser repair month by month, record every fault, fix and cost in a short log, then set aside a small monthly amount for the year when something breaks. The running total of repairs on one appliance is the number that tells you when a replacement starts to look sensible.

What goes into a repair log?

One row per incident is enough:

  • Date and what went wrong, in your own words.
  • What was replaced or fixed.
  • Parts cost and labour cost, if the bill separates them.
  • Who did it, and how you paid.
  • Whether anything was under warranty.

Also write down the purchase date and the price of the geyser itself at the top of the log. You will need both when you start comparing repairs with replacement.

How often does a geyser cost money?

A geyser is a one-time purchase that gives you a few quiet years and then a few years of small repairs, though the timing varies a great deal and nobody can predict yours. That is why a monthly figure for a geyser should not come from the average of anyone else's household. It should come from your own history, and in a new home you can start with a modest set-aside and adjust after the first year.

A hypothetical example

Say a household sets aside ₹150 a month for the geyser. Over twelve months that is ₹150 × 12 = ₹1,800. In January the heating element fails and the repair costs ₹1,150. In November the thermostat is replaced for ₹900. The log looks like this:

MonthFaultCostRunning total
JanuaryHeating element₹1,150₹1,150
NovemberThermostat₹900₹2,050

Repairs for the year total ₹2,050, which is ₹250 more than the ₹1,800 set aside. Next year, a higher set-aside of ₹175 a month would cover ₹2,100. You do not need to be exact. You are only aiming to have the money ready when something goes wrong.

When does repairing stop making sense?

Suppose a similar new geyser would cost ₹6,800 and your repairs have added up to ₹2,050. That is a little over 30 per cent of the replacement price (2,050 ÷ 6,800 is about 0.30). A third failure on the same appliance might make you think about it harder. This is not a rule, because the right answer depends on the age of the unit, the nature of the faults and the advice of a technician you trust. But because you have kept the log, you can have that conversation with real numbers instead of memory.

It also helps to write down, at the time of each repair, the technician's own opinion of the unit: sound for another year, or ageing. A remark like that, dated and kept in the log, is more reliable than your memory when you sit down to decide, and it costs nothing to record.

What should a review look like?

  1. Once a year, add up repair costs for the geyser.
  2. Compare them with what you set aside, and increase or reduce the monthly amount by a round number.
  3. Look at the pattern: same fault repeated, or different ones. Repeated faults are worth raising with the technician.
  4. If the total repair cost has reached a third of the price of a new unit, begin collecting quotes without any pressure to buy.

In SpendixAI, you can keep the repair as its own sub-category and add the photo of the bill to each entry, so the history is there without hunting through messages. A simple sheet works too if it has date, fault, cost and running total columns.

Quick checklist

  • Write the purchase date and price of your geyser.
  • Start the log with any repair you can recall.
  • Choose a monthly set-aside, even ₹100.
  • Photograph the warranty card and keep it with the log.
SPENDIXAI JOURNAL

Useful ideas start with a clearer picture of your own spending.

Explore your reports