Tractor diesel is easiest to control if you track litres and engine hours as well as rupees. Write down every fill-up with its litres and amount, note the hour-meter reading, and each month you can work out litres per hour and cost per acre. Rupees alone only tell you the diesel price moved.
What do you need to write at each fill-up?
- Date and where you filled up.
- Litres bought and the amount paid.
- The hour-meter reading, or the odometer if that is what your tractor has.
- What the tractor will be doing: ploughing, tilling, hauling, running a thresher.
- Whether the fuel is going to the tractor only, or also to a pump set or a can.
Without the hour reading you cannot tell the difference between heavy work and a leak. It takes five seconds when you refill.
How often does this cost arrive?
Diesel is an irregular, seasonal cost. It comes in bursts around land preparation, sowing and harvest, and trickles in between for haulage. In a ploughing month you may fill up three or four times. In a quiet month, not at all. So a fixed monthly budget is less useful than a seasonal total and a cost per acre.
A hypothetical month with the arithmetic
Say diesel costs ₹90 a litre for this example, and the month has three fill-ups.
| Fill-up | Litres | Amount |
|---|---|---|
| First | 40 | ₹3,600 |
| Second | 25 | ₹2,250 |
| Third | 35 | ₹3,150 |
Total litres are 40 + 25 + 35 = 100 and total spend is ₹9,000. Say the hour meter moved by 36 hours, and the tractor worked 20 acres. Then fuel use is 100 ÷ 36 = about 2.8 litres per hour, and 100 ÷ 20 = 5 litres per acre. Cost per acre is ₹9,000 ÷ 20 = ₹450. These are only the numbers of an imaginary month. Your own tractor, soil and implement will give different ones, and the value is in comparing your month with your previous months.
How do you spot a change?
Compare litres per hour and litres per acre with your own earlier figures for the same job. If ploughing used 5 litres per acre last year and 6.5 now, ask what changed: a heavier implement, wetter soil, a worn injector or an air filter that needs cleaning. A mechanic can look at the engine. The log tells you when to ask. A rising rupee figure with steady litres per hour is just the fuel price.
Keep service work apart from fuel. Filter, oil and belt changes belong under Farm machinery repairs, so the diesel figure stays clean. If a neighbour borrows the tractor, note the hours and the fuel for that job separately, so you know what it really cost to run.
What does a sensible monthly review take?
- Add the month's litres and rupees and check against receipts or UPI entries.
- Divide litres by hours and by acres worked.
- Compare with the same job in the previous season.
- Check the notes for fuel that went to anything besides the tractor.
- Write the next service date if the hours suggest one is due. Check your tractor's manual for the interval.
Getting the entries in without fuss
Many pump stations take UPI, so the payment shows in your bank statement with the station's name. SpendixAI lets you upload that statement as PDF, CSV or Excel, review the rows before they are saved, and add a rule so that station goes to your Farm fuel category. Cash fills can be added by hand. The litres and hour readings stay in your notebook, since they are not things a statement carries.
Before the next fill-up
- Carry a pen, or note the reading on your phone.
- Write litres and hours every time.
- Keep tractor fuel and pump fuel apart.
- Compare cost per acre with the same job last season.
- If farm fuel costs go into tax or loan paperwork, rules change, so confirm with your CA.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

