When you prepay an India loan from abroad, the number that matters is not what you sent but what the lender credited. Record both, plus the exchange rate and any fee, then compare the lender's revised schedule against the credited amount.
Why two numbers
Your bank debits pounds, euros or dollars. The lender credits rupees. Between them sit an exchange rate and sometimes a fee. If you only keep the amount you sent, you cannot tell whether the loan received what you intended.
A worked example in pounds
Say you send £1,000 and the rate applied is ₹105 per pound, an invented figure. The rupees arriving should be 1,000 times 105, which is ₹1,05,000. Suppose the lender credits ₹1,04,400 after some deduction on the way.
| Item | Working | Amount |
|---|---|---|
| Sent | £1,000 | £1,000 |
| Rate | Assumed | ₹105 |
| Expected credit | 1,000 x 105 | ₹1,05,000 |
| Credited by lender | From statement | ₹1,04,400 |
| Difference | ₹1,05,000 - ₹1,04,400 | ₹600 |
The difference of ₹600 could be a fee, a different rate or something else. Your transfer receipt and the lender's statement will show which. Do not guess.
What should the record contain?
- Date sent, amount sent and currency.
- Rate and any fee shown on the transfer receipt.
- Date and rupee amount credited to the loan, from the statement.
- Principal after the prepayment, from the revised schedule.
- Option applied: lower EMI or shorter tenure.
How long until it shows on the schedule?
That depends on the lender. After you send, look at the next statement and ask for an updated schedule. If the credited amount does not appear, send the transfer receipt and ask them to trace it.
What about the schedule itself?
- Ask for a revised schedule after the credit is confirmed.
- Check the opening balance equals the old balance minus the credited amount.
- Write down the new last instalment date.
- Compare the next EMI debit with the schedule.
Keeping the figures together
In SpendixAI each expense can carry its own currency, and totals use a base currency with the rate saved on each transaction. Choose the base currency before importing, since it cannot be changed once transactions exist. The rate saved there is your record, not the lender's.
How do you handle several transfers in a year?
Keep the same table for each one and add a total row. The total credited in rupees is the number to compare with the lender's statement, not the total sent in your currency. If rates move during the year, the two totals will not move together.
- Column one: date sent.
- Column two: amount in your currency.
- Column three: rupees credited.
- Column four: effective rate, which is rupees divided by your currency amount.
In the pound example, ₹1,04,400 divided by £1,000 gives ₹104.40 per pound, a little below the ₹105 you assumed. That effective rate is the honest one to use when planning the next transfer.
When does the credited amount matter most?
It matters most when the lender updates the schedule from the credited figure and not from the figure you sent. A mismatch of a few hundred rupees will not change much, but over several transfers it adds up and can leave you wondering why the balance is higher than your own sum. The table above lets you spot it after the first transfer instead of the fifth.
Where to get answers
Ask the lender about prepayment terms and their effect on the schedule. For rules on remittance or tax, ask a professional who knows your residency. we cannot say what applies to you.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

