Before you agree to buy a resale flat, walk through it with a checklist and collect written quotes for each repair, then add the total to the asking price. The sum is the real cost of moving in, and a flat that looks cheap can stop looking cheap once seepage, wiring and flooring are priced.
What should you check, room by room and system by system?
Use the table in the order you walk. The quote column stays empty until a contractor gives you a written figure, and the notes column records what you saw and when.
| Area | What to look for | Quote (₹) | Notes |
|---|---|---|---|
| Walls and ceilings | Damp patches, peeling paint, stains below bathrooms | Blank | Photos with date |
| Electrical | Old wiring, loose switches, number of power points, MCB box | Blank | Ask an electrician to inspect |
| Plumbing | Slow drains, rusted pipes, tap pressure, leaks under sinks | Blank | Run every tap for a minute |
| Flooring | Cracked or hollow-sounding tiles, uneven levels | Blank | Tap-test a few tiles |
| Kitchen | Platform, cabinets, chimney point, sink and tap | Blank | Photos |
| Bathrooms | Seepage, tile gaps, fittings, ventilation | Blank | Check the flat below, if possible |
| Doors and windows | Hinges, locks, frames, glass | Blank | Open and close each one |
How do you turn the quotes into one number?
Get at least two written quotes for any big item, with what is included and how long each stays valid. Then add them up and put your own buffer on top. Say the made-up quotes are waterproofing ₹45,000, wiring ₹60,000, plumbing ₹35,000, flooring ₹1,10,000, kitchen ₹1,20,000 and painting ₹80,000.
- Quotes total: ₹45,000 + ₹60,000 + ₹35,000 + ₹1,10,000 + ₹1,20,000 + ₹80,000 = ₹4,50,000.
- Buffer of your choice, say 10 per cent for this example: ₹45,000.
- Repair estimate with buffer: ₹4,95,000.
- If the asking price is ₹62,00,000, the price to move in is ₹62,00,000 + ₹4,95,000 = ₹66,95,000.
Those numbers are invented for illustration. Your own quotes will differ, and the buffer is a personal choice, not a rule.
Which problems deserve a specialist, not a guess?
Cracks that run through walls, a leaning balcony or damp that returns after painting are not something to price from a distance. Ask a structural engineer or a qualified inspector to look at them before you commit, and note their report in the file. Check as well what the society says about common-area works and any pending dues, since they affect your cost too.
When you ask contractors for quotes, give each of them the same list of rooms and the same finish, so the numbers can be compared. Ask what brand of material is included, how long the work will take, whether they clear the debris and how the payment is staged. A quote that only says a lump sum for the whole flat is hard to check against your table, so ask for it to be broken down room by room.
What else belongs in the cost view?
- The costs of buying itself, such as registration and legal checks, read from your lawyer's own estimate.
- Moving-in costs, such as cleaning, locks and a deep clean.
- Any loan charges you will pay, taken from the lender's sheet.
- The time the repairs will take, during which you may pay rent elsewhere.
What should you do with the estimate after you buy?
Keep the estimate sheet. Once repairs begin, log each invoice against its row and compare. In SpendixAI you can group the repair invoices under a custom category and use the Report builder to filter and group them, then see how the final spend compares with your quotes. A gap on one row, such as flooring, tells you what to question before the next flat.
Useful ideas start with a clearer picture of your own spending.
Explore your reports


