When one floor uses more electricity, the fairest split is one based on measured use, which means a sub-meter reading for each floor. If a sub-meter is not practical, a fixed split with a yearly review is simpler, and a per-appliance estimate sits in between. Whichever you pick, write it down so nobody has to remember what was agreed.
What are the three ways to split the bill?
- Sub-meter readings. Each floor has its own meter, or an electrician fits sub-meters behind the main one. Each floor pays for its own units, and shared items such as the stairwell light are split equally.
- Fixed split with an annual review. The floors agree on a ratio, such as 60:40, and revisit it once a year, ideally before summer.
- Per-appliance estimate. You list the heavy appliances on each floor, estimate hours of use and divide the bill by that weight.
Check with your electrician and the electricity board before fitting extra meters. Rules for connections differ, and your own bill and meter details are the final authority.
How does a sub-meter split work in practice?
Note the sub-meter readings on the day the main bill is generated. Subtract last month's reading to get units used. Then divide the main bill in proportion to units, because the bill's own charges are usually not a flat per-unit rate.
Say the main bill is ₹6,400 for 400 units. The ground floor sub-meter shows 180 units and the first floor 220 units. The ground floor's share is 180 ÷ 400 × 6,400 = ₹2,880, and the first floor's is 220 ÷ 400 × 6,400 = ₹3,520. The two shares add up to ₹6,400. These numbers are hypothetical, and an actual bill may include fixed charges, so use the totals from your own bill.
What if there is no sub-meter and one bedroom has a heavy air conditioner?
This is where an appliance estimate helps. Suppose a household has two floors and one bedroom on the first floor runs a 1.5 ton AC for about six hours a night. You do not need exact kilowatt figures; a rough weight is enough. Give each heavy appliance a weight by hours and size, add them up per floor, and split the bill in that ratio.
| Item | Floor | Rough weight |
|---|---|---|
| Fans and lights, all rooms | Ground | 3 |
| Fridge and TV | Ground | 3 |
| Water heater, short daily use | Ground | 2 |
| Fans and lights, all rooms | First | 2 |
| AC bedroom, six hours | First | 6 |
| Washing machine | First | 1 |
Ground floor weights add to 8, first floor to 9, total 17. On a hypothetical bill of ₹5,100, the ground floor pays 8 ÷ 17 × 5,100 = ₹2,400 and the first floor pays 9 ÷ 17 × 5,100 = ₹2,700. The weights are guesses, so treat the result as a starting point and adjust once everyone has looked at it.
Is a fixed split fairer than it sounds?
It can be, if the floors use roughly the same amount across the year and nobody is keeping score. Its weakness is that usage changes: a new baby, a work-from-home member or a new AC can tilt the balance. A yearly review before summer, when bills climb, takes care of this. Write the agreed ratio, the date of the next review and who raises it.
How should the payment be recorded?
Whoever pays the main bill records the full amount, then the other floors record their share as a payment to that person. If you track expenses in an app or sheet, give each floor a line: Electricity (our share). Using the same category each month lets you compare summers with winters. In SpendixAI you can set the account for each transaction and use a category of your own, which keeps this kind of monthly bill easy to spot in reports.
What to review each year
- Has anyone added a big appliance or a new family member?
- Do the sub-meter readings match the main bill within reason?
- Is the ratio still acceptable to everyone?
- Should shared items such as the pump or common lights be listed separately?
Useful ideas start with a clearer picture of your own spending.
Explore your reports


