When the shop's power bill jumps, compare units used, not just rupees, against the last six bills, and check the billing period and the reading type before looking at your appliances. Many surprises come from a longer billing period, an estimated reading or a carried-over amount rather than from real extra use. Work through the checklist below in order, from paper checks to physical checks.
What should you check on the bill first?
- Units consumed. Compare this bill's units with the last six. If units are the same and the amount is higher, the cause is in charges, not in use.
- Billing period. A bill covering 33 days will be higher than one covering 28. Check the dates.
- Reading type. See whether the reading is actual or estimated. An estimated reading can be corrected on the next actual reading, but you should ask about it.
- Previous dues, late fees or adjustments carried in the amount payable.
- Fixed or demand charges and the connection category printed on the bill. If anything looks wrong, ask your electricity provider to explain it line by line.
Has something changed in the shop?
Think back over the last billing period and tick what applies:
- A new freezer, display cooler, extra fan or a bigger light fitting.
- Longer opening hours, a festival season or an extra evening shift.
- A neighbouring unit or a first-floor stall connected on your meter.
- A tenant, workshop or hoarding light sharing your supply.
- A new meter or a tariff or category change on your connection.
How do you estimate what an appliance adds?
Units are watts times hours, divided by 1,000. Say a new chest freezer draws about 200 W on its label and runs through the day. Over 24 hours that is 200 x 24 / 1,000 = 4.8 units, and about 144 units over 30 days. Read the real wattage off the appliance label for your own estimate.
| Change (made-up) | Working | Extra units |
|---|---|---|
| Chest freezer, 200 W, 24 hrs, 30 days | 200 x 24 x 30 / 1,000 | 144 |
| AC 1,500 W, 2 extra hours, 26 days | 1,500 x 2 x 26 / 1,000 | 78 |
| Total added | 144 + 78 | 222 |
If your rate works out to around ₹8 per unit on your own bill, which is only an example, 222 extra units would add roughly ₹1,776. Divide your own bill amount by your own units to see the real figure.
Could a cooler or freezer be faulty?
A cooler that runs without stopping uses far more than one that cycles. Check the door seal for gaps, ice build-up, a dusty condenser, a door that is opened often or stock packed against the vents. A compressor that runs all day and still struggles to cool is worth a technician's visit before it fails completely.
What if the bill still looks wrong?
Keep the last six bills, note the dates and units, and photograph the meter reading on the same day each month. Take these to the provider's office or customer channel and ask for a reading check or a meter test. Photos and a written complaint help your case much more than a phone call alone.
What should you note each month from now on?
- The date of the meter reading and whether it is marked actual or estimated.
- Units used, so you can compare them with the same month last year.
- Any change in the shop, such as a new appliance, which you can write beside the bill.
- The date and amount you paid, in case a payment does not show up.
Next step
Once you find the cause, write it down beside the bill. If your bank statements show the power payment each month, an import into SpendixAI lets you see the electricity line across the year and tell a one-off spike from a rising trend.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

