A higher electricity bill after you start working from home usually comes from more hours of AC, fans, lights and a laptop running in the daytime. To find out how much belongs to work, compare the units on your bills before and after, log the extra AC hours, and use your own bill to work out the rupees per unit. You do not need to know any tariff; your bill already holds the numbers.
Which numbers do I need from the bills?
Collect your last six bills if you have them. From each, write down the month, the units consumed and the total payable. Do not compare rupees alone, because the rupee amount can move for reasons such as changes in rate or fixed charges. Units are the cleaner measure. Then compare the same month a year earlier, since summer and winter differ.
How do I estimate the share caused by work?
Here is a made-up example. Before WFH the bill was 210 units and ₹1,680. After starting WFH it is 330 units and ₹2,970.
| Step | Working | Result |
|---|---|---|
| Extra units | 330 − 210 | 120 units |
| Extra rupees | ₹2,970 − ₹1,680 | ₹1,290 |
| Rupees per extra unit | ₹1,290 ÷ 120 | ₹10.75 |
| Extra AC hours logged | 4 hours × 20 home days | 80 hours |
| AC units, if the AC uses about 1 unit an hour | 80 × 1 | 80 units |
| Rupees linked to the AC | 80 × ₹10.75 | ₹860 |
| Rupees for everything else | ₹1,290 − ₹860 | ₹430 |
The assumption of one unit an hour is only a placeholder; check the label or manual of your own AC, or watch your meter for an hour. The rupee rate per extra unit is also worked out from your bills, not assumed.
How do I log the AC hours?
Keep a simple note in your phone: the date, and the number of hours the AC ran during work time. A line like "12 May, 6 hours" is enough. Count only the extra hours compared with a normal office day, because you would have used the AC at night anyway. Do this for the whole billing period, then add up.
What else raised the bill?
- Laptop, monitor and charger running for eight or more hours.
- Fans and lights on in a room that was empty during office hours.
- A water pump or geyser used more often at home.
- A hotter month. This is why the same month last year is a fairer comparison than last month.
What can I do about it?
Small changes help more than dramatic ones. Setting the AC temperature a little higher, using a fan along with it, closing doors, or shifting AC use to the hottest part of the day will change the numbers you log. After a month of changes, repeat the table and see whether the extra units fall. If they do not, your biggest cause is elsewhere.
How long should I keep tracking?
Two billing cycles will show a pattern, and a full year will show the seasons. If your bill arrives every two months, you may need to compare pairs of bills rather than single ones. When your work pattern changes, for instance more office days, start a fresh before-and-after comparison instead of stretching the old one. A short note on each bill, such as "heatwave" or "guests for a week", will save you from drawing the wrong conclusion later.
Keeping the record
Record each electricity payment as a separate expense in your tracker with the units in the note. SpendixAI lets you keep the bill with the transaction as a receipt, and a Utilities category will show the monthly total next to your other spending. Then each month's comparison takes a minute.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

