To check a painter's estimate, measure the paintable wall area of each room, multiply by the number of coats the quote states, divide by the coverage the paint maker prints on the tin, and compare the litres you get with the litres in the estimate. The worked example below uses invented dimensions and an assumed coverage figure.
How do you measure the wall area of a room?
For each room, walk the walls with a tape. Perimeter times height gives the wall area. Subtract doors and windows, which are not painted the same way. Painters in India usually quote in square feet, so measure in feet.
Take a room 12 feet by 10 feet with a height of 10 feet. The perimeter is 2 × (12 + 10) = 44 feet, so the walls come to 44 × 10 = 440 square feet. Subtract one door of 7 × 3 = 21 square feet and one window of 4 × 3 = 12 square feet, giving 440 − 33 = 407 square feet. The ceiling is 12 × 10 = 120 square feet.
How many coats does the estimate mean?
Read the estimate carefully. Many quotes say something like "putty, one coat primer, two coats emulsion". Each stage has its own area and quantity. If the quote does not state the coats, ask. A two-coat finish needs twice the paint of one coat for the same area.
How do you work out litres?
Coverage per litre varies by product and by how rough the wall is. Look at the label on the tin, or ask the dealer for the stated coverage per coat, and use that figure. For the example, assume a label says 100 square feet per litre per coat; this is made up for illustration.
- Walls, two coats: 407 × 2 = 814 square feet; 814 ÷ 100 = 8.14 litres.
- Ceiling, two coats: 120 × 2 = 240 square feet; 240 ÷ 100 = 2.4 litres.
- Total for the room: 8.14 + 2.4 = 10.54 litres.
Add a small margin for touch-ups, say ten percent, so about 11.6 litres, which you would round up to the nearest tin sizes the dealer sells. If the estimate shows 20 litres for the same room, ask the painter to show how it was worked out.
What does a worksheet look like?
| Room | Wall area (sq ft) | Ceiling (sq ft) | Coats | Litres worked out | Litres in estimate |
|---|---|---|---|---|---|
| Bedroom 1 | 407 | 120 | 2 | 10.54 | 11 |
| Living room | 640 | 240 | 2 | 17.6 | 24 |
| Passage | 180 | 60 | 2 | 4.8 | 5 |
In a sheet, with walls in B, ceiling in C, coats in D and coverage per litre in a cell G1, litres are =(B2+C2)*D2/$G$1. The living room in this made-up table shows a big gap between 17.6 and 24 litres, which is the kind of row to question.
How do you check the paint actually bought?
Ask for the tin bills or take photos of the empty tins before the painter disposes of them. Check the brand, shade code, size and batch number against the estimate. Keep one sealed leftover tin per colour for later touch-ups, noting where each colour was used.
Where does a tracker help?
SpendixAI can keep the advance, the paint purchase and the final payment under one category for the home painting job, with bills attached to each transaction. The area and litre calculations stay in your sheet.
Before you sign the estimate
- Measure each room yourself and note the numbers.
- Confirm the coats and surface preparation.
- Check the paint brand and coverage on the label.
- Ask when and how the final measurement will be done.
Useful ideas start with a clearer picture of your own spending.
Explore your reports
