A dryer's running cost is its power in kilowatts, multiplied by the hours it runs, multiplied by your electricity rate per unit. A 2,000 watt dryer running 1.5 hours uses 3 units, which at ₹8 a unit is ₹24 a load. Compare that with a laundry service priced per kilo, using your own wattage, rate and washing habits instead of anyone's average.
The formula to use
Cost per load = (watts ÷ 1,000) × hours × rate per unit. The wattage is printed on the dryer's label or in its manual. Your rate per unit comes from your electricity bill, where it may differ by how many units you use, so use the rate that applies to your usage. One caution: the label shows the maximum power draw, and many dryers cycle their heating on and off, so actual use can be lower. Your meter or a plug-in energy monitor gives a real reading.
A worked example with made-up numbers
Say the dryer is 2,000 watts and a load takes 1.5 hours. Say the rate is ₹8 a unit, you dry 3 loads a week and the rainy season lasts 13 weeks. The laundry service charges ₹60 a kilo for wash and fold, with 4 kg per load. None of these are typical prices; replace each with your own.
| Option | Working | Cost for the season |
|---|---|---|
| Dryer at home | (2,000 ÷ 1,000) × 1.5 = 3 units; 3 × ₹8 = ₹24 a load; 39 loads × ₹24 | ₹936 |
| Laundry service | 4 kg × ₹60 = ₹240 a load; 39 loads × ₹240 | ₹9,360 |
| Fan and drying rack | 50 watts × 8 hours = 0.4 units; 0.4 × ₹8 = ₹3.20 a load; 39 × ₹3.20 | About ₹125 |
The arithmetic: 3 loads × 13 weeks is 39 loads. 39 × 24 = 936, 39 × 240 = 9,360 and 39 × 3.20 = 124.80. Remember that the dryer also has a purchase cost and the washing itself uses power and water, and the service includes the washing. The table compares only the drying step, so do not read it as a full comparison.
How do you do the sum in a spreadsheet?
Put watts in B2, hours in C2, rate in D2 and loads in E2. In F2 write =(B2/1000)*C2*D2 for the cost per load. In G2 write =F2*E2 for the season. Change the loads and the rate, and the totals update.
Is it cheaper than your own bills suggest?
Check against your real bills. Look at the electricity bill from a dry-season month and a rainy month of similar weather otherwise, and see how many more units you used. If the dryer added about 36 units over a month with 12 loads (12 × 3), that should show up as a rise of roughly that size, give or take other appliances. If the bill rose by much more, something else is using power.
What else adds to the monsoon laundry cost?
- Extra washes, because damp clothes smell if left unwashed for long.
- Detergent and fabric softener used faster.
- Ironing, which some people use to finish damp clothes, and its electricity.
- A drying rack, hangers or a clothesline fitted indoors.
- Dry cleaning for heavier items that cannot be dried at home.
- Repairs to the dryer or washing machine.
How do you track the season's costs?
- Create a laundry category with sub-categories for service, detergent and drying.
- Add each laundry service payment as you make it, noting kilos if the bill shows them.
- Add the electricity bill each month, and note the units used.
- At the end of the season, total the category and compare it with the dry months.
If your payments go through UPI or a card, a statement import into SpendixAI will bring those rows in for review, and its categorisation can learn your laundry vendor from your corrections. The unit readings from the bill are best kept in your own note or sheet.
Before the next monsoon
- Read the dryer wattage and write it down.
- Find your rate per unit on the latest bill.
- Ask the laundry for a per-kilo price in writing.
- Choose which clothes go to the dryer, the service and the rack.
Useful ideas start with a clearer picture of your own spending.
Explore your reports


