Home and property

Installing an EV charger at home: permission, wiring and meter costs

A checklist for installing an EV charger at home: cost lines to ask about, society permission, wiring, a separate meter and electricity use.

Editorial illustration for Installing an EV charger at home: permission, wiring and meter costs

Before installing an EV charger at home, list every cost line you will be asked to pay, ask for each in writing and record what you actually spend. The main lines are the charger itself, the wiring from the main board to the charging spot, protective devices, any separate meter, society permission and the electricity the car will use.

What cost lines should you ask about?

LineWhat to askQuoted (₹)Actual (₹)
Charger unitModel, power rating, warranty, included or bought separatelyAskRecord
Wiring and cableLength from the board, type of cable, conduitAskRecord
ProtectionDedicated breaker, earthing, any other device the installer advisesAskRecord
Separate meterWhether needed or possible, application fee, depositAskRecord
Society approvalAny fee, deposit or conditionAskRecord
Installation labourVisit charge, civil work such as drilling or trenchingAskRecord

This article gives no prices because they vary by charger, wiring distance and city. Fill the table with quotes from your own installer and electricity provider, and compare at least two quotes.

Who needs to give permission?

  • Your society or building committee, if you live in a flat, for any work in common areas, parking or the common meter.
  • The owner, if you rent.
  • The electricity provider, if you need a new connection, a load change or a separate meter.
  • An electrician licensed or approved to do the work, as your provider or local rules may require.

Ask each of them what they need, and get the answers in writing. Rules differ by state and by society, so do not rely on someone else's experience.

What about wiring and safety?

Have a qualified electrician look at the existing wiring, the main board and the earthing before choosing a charger. A charger that runs for hours is a steady load on the wiring, which is different from a mixer or a fan. Ask the electrician to explain what they will install and why, and keep the written scope with your records. Never choose the cheapest option without understanding what was left out.

How do you estimate the electricity the car will use?

Check the units per kilometre or the battery size from the car maker's own information. Purely as an invented example, suppose you drive 300 km a month and the car uses about 0.15 units per km, so 300 × 0.15 = 45 units. If your rate is ₹8 a unit, that is 45 × 8 = ₹360 a month. Check your own bill for the real rate, because tiers and fixed charges change the average.

Where does a tracker help?

SpendixAI can hold the installation payments under a custom category such as EV charging, with quotes and bills attached to each transaction, and show you the electricity bills month by month. You can add the cash payments to the electrician by hand.

What about parking, cable routes and later costs?

Look at where the car will stand and how far it is from the board. A longer run costs more, and a run across common space needs the society's agreement. Ask the installer where the cable will go, how it will be protected and who repairs the wall or floor afterwards. Think also about later costs: servicing the charger, replacing a cable, a change of car that needs a different connector, and the cost of removing the charger if you move.

Add each of these as a line in your sheet, even if the figure is blank, so you remember to ask.

Before the installer starts

  1. Get the quote itemised.
  2. Get the society's permission in writing.
  3. Confirm warranty and who services the charger.
  4. Keep photos of the wiring before it is closed up.
  5. Record every payment with its bill.
SPENDIXAI JOURNAL

Useful ideas start with a clearer picture of your own spending.

Explore your reports