Travel and vehicles

Mileage when you fill petrol by rupee amount, not full tank

Filling petrol in rupee amounts? Convert rupees to litres with the pump price, anchor on full tanks, and work out scooter or bike mileage with a five-fill log.

Editorial illustration for Mileage when you fill petrol by rupee amount, not full tank

If you fill petrol by rupee amount, convert each fill into litres by dividing the amount by the pump price, then calculate mileage only between two full-tank fills. Divide the kilometres ridden between those two full tanks by the litres you added after the first one. Rupee fills in between are just litres to add up.

Why do I need a full-tank anchor?

Mileage is kilometres divided by fuel burned. A rupee fill does not tell you how much petrol was already in the tank, so one fill alone cannot give mileage. But if the tank is full at the start and full at the end, all the petrol added in between is exactly what you burned. Those two full tanks are the anchors.

How do I convert rupees to litres?

Litres = amount paid divided by price per litre. Use the price on that day's pump slip, because the price changes. If the slip shows litres, use the slip.

A made-up five-fill log

Assume the pump price was ₹100 a litre at first and ₹102 later.

FillWhat you didAmountLitresOdometer
1Filled to full (anchor)IgnoreIgnore8,200 km
2Rupee fill₹2002.00-
3Rupee fill₹2002.00-
4Rupee fill₹3002.94-
5Filled to full again₹2502.458,630 km

Fills 4 and 5 were at ₹102: ₹300 divided by 102 is about 2.94 litres, and ₹250 divided by 102 is about 2.45 litres. Litres added after the anchor: 2.00 plus 2.00 plus 2.94 plus 2.45, which is 9.39 litres. Distance: 8,630 minus 8,200 is 430 km. Mileage is 430 divided by 9.39, about 45.8 km per litre.

How do I keep it running?

Fill 5 is the new anchor. Your next stretch starts at its odometer reading, and you add every rupee fill after it until the next full tank. In a sheet, with litres in column D and odometer in column E, a row for each stretch can use =(E7-E2)/SUM(D3:D7), where row 2 is the anchor and row 7 the next full tank. Include the litres of the final full fill, but not those of the first anchor.

How accurate is this?

  • Filling to full is not perfectly repeatable. Stop at the same point each time, for instance at the first click of the nozzle.
  • Park the bike upright and level when you fill.
  • Use stretches of at least 200 to 300 km, since the error from a slightly different fill matters less over a long distance.
  • If the pump displays litres, trust that over your calculation.

Where does a tracker help?

The rupee amounts are the easy part: they arrive on your statement. SpendixAI can import them so you need not retype, but the litres and odometer remain yours to add in a note or a sheet. Cash fills are the ones worth entering by hand the same day.

Fuel types and pump habits vary, so test the method over two stretches before relying on it. If the two results come out within a few km per litre of each other, the habit of filling is consistent enough to trust. If they differ widely, check whether the tank was really full both times, or whether one stretch included an unusual trip.

A note on the price: if you buy from the same pump every time, the price is easy to record. If you fill at different pumps, write the price from each slip, or the litres directly if the pump shows them.

Do this once

  1. Fill to full and write down the odometer.
  2. Log each rupee fill with the day's price.
  3. Fill to full again after 200 to 300 km.
  4. Divide distance by total litres added since the anchor.
SPENDIXAI JOURNAL

Useful ideas start with a clearer picture of your own spending.

Explore your reports