On a cumulative savings chart, the height of the line shows how much you have saved so far, and the slope shows how fast you are saving right now. A line can keep climbing while its slope flattens, which means you are still saving but saving less each month. If you only look at the height, you can miss the slowdown completely.
What does a cumulative line actually show?
A cumulative line adds each month's saving to the running total. If you save ₹10,000 in January and ₹10,000 in February, the line is at ₹10,000 after January and ₹20,000 after February. Since savings are added and rarely subtracted, the line rises almost by definition. That is why height is a weak signal of behaviour: it goes up unless you withdraw money.
Can two households end at the same balance with different stories?
Say two households each save a total of ₹1,20,000 over twelve months. Household A saves ₹10,000 every month. Household B saves ₹15,000 a month for the first six months, then ₹5,000 a month for the next six. All figures are hypothetical.
| Month | Household A (total saved) | Household B (total saved) | B's monthly saving |
|---|---|---|---|
| 3 | ₹30,000 | ₹45,000 | ₹15,000 |
| 6 | ₹60,000 | ₹90,000 | ₹15,000 |
| 9 | ₹90,000 | ₹1,05,000 | ₹5,000 |
| 12 | ₹1,20,000 | ₹1,20,000 | ₹5,000 |
At month 6 Household B is ₹30,000 ahead, and at month 12 the two are level. Draw the two lines and B's line starts steep and bends flat after month 6. A is a straight line. B's line is still rising at month 12, but its slope has fallen to a third of what it was. Something changed at month 7, perhaps a new EMI, school fees or a lower income, and the height alone would not tell you.
How do you measure the slope?
Slope is simply the monthly saving, the amount added to the line in a month. With the cumulative total in column C and the month number in column A, you can calculate it two ways.
- Month to month: in D3 enter =C3-C2 and drag down. This is the saving for each month.
- Over a window: for the last three months, =SLOPE(C11:C13,A11:A13). This gives the average monthly saving across those months. SLOPE takes the y values first, then the x values, and works in Excel and Google Sheets.
To build the cumulative column itself, put the monthly saving in column B and enter =SUM($B$2:B2) in C2, then drag it down. The first cell is locked and the last moves, so each row adds one more month.
How do you read the line quickly?
- Look at the angle. Steeper means faster saving; flatter means slower.
- Look for kinks, the points where the angle changes. Each one marks a change in your income, spending or saving habit.
- Look for dips, which mean a withdrawal. Check whether it was planned.
- Compare the slope with the saving target you set, for example ₹10,000 a month.
What should you do when the slope flattens?
First, find the month it bent. Then look at what changed in your spending or income in that month. In Household B's case, a ₹10,000 a month drop in saving could be a new EMI, a rent increase or a lifestyle change. Decide whether the new level is deliberate. If it is, update your plan. If it is not, address the cause, not the chart.
Also check that transfers to savings are being recorded as transfers and not as spending. Otherwise your savings line can look flat for the wrong reason.
Can a tracker draw this chart?
Pro in SpendixAI includes savings goals, and your transactions and categories can be filtered and downloaded as a CSV for charting in a sheet. A cumulative line from a CSV takes about five minutes to build, and the slope calculation above works on the same numbers.
A quick checklist
- Chart your savings as a cumulative line, but also keep a column of monthly saving.
- Check the slope of the last three months against your plan every quarter.
- Mark any kink or dip with a one-line reason.
- Compare households or years by slope, not by the final height alone.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

