To get your yearly housing cost per square foot, add everything you paid to keep the home for twelve months and divide by the area you live in. Say the total is ₹3,00,000 and the home is 900 square feet; the answer is about ₹333 per square foot per year. The figure is most useful for comparing homes you have lived in.
What should go into the total?
- Rent, or the EMI of the home loan
- Society maintenance
- Property tax, if you own
- Repairs and servicing
- Electricity, water and gas, if you want the full cost of living there
- One-off costs like the broker fee, spread across the years you stayed
Pick the list once and use it for every home. If you leave out utilities for one flat and include them for another, the comparison means nothing.
Which area do I divide by?
Use one area measure for all homes and write down which. Carpet area, built-up area and super built-up area give different results, and builders and landlords quote different ones. Carpet area is the floor you actually walk on, so it is the most honest for a cost of living comparison, but any one measure works if you stay consistent.
Worked example: a rented flat
Hypothetical figures. Rent is ₹22,000 a month, so ₹2,64,000 a year. Maintenance paid by you is ₹2,500 a month, so ₹30,000. Repairs for the year were ₹6,000. Total is 2,64,000 plus 30,000 plus 6,000, which is ₹3,00,000.
Area is 900 square feet. So 3,00,000 divided by 900 is 333.33. That is about ₹333 per square foot per year, or about ₹28 per square foot per month, because 3,00,000 divided by 12 is 25,000 and 25,000 divided by 900 is 27.78.
Worked example: an owned flat
Now say you own a 1,150 square foot flat. EMI is ₹28,000 a month, so ₹3,36,000 a year. Society is ₹3,000 a month, so ₹36,000. Property tax is ₹10,000 and repairs ₹8,000. The total is 3,36,000 plus 36,000 plus 10,000 plus 8,000, or ₹3,90,000. Divided by 1,150, that is 339.13, so about ₹339 per square foot per year.
| Measure | Rented flat | Owned flat |
|---|---|---|
| Yearly total | ₹3,00,000 | ₹3,90,000 |
| Area | 900 sq ft | 1,150 sq ft |
| Per sq ft per year | About ₹333 | About ₹339 |
What should I do with the answer?
Use it as a yardstick, not a verdict. If you are weighing a move, compute the same figure for the new place using the rent, maintenance and utilities you have been quoted, and compare with what you pay now. A home that is cheaper per square foot but much farther from work may cost more in travel, and this number will not show that.
Keep the figures for each home you have lived in in one small table with the year, area measure and total. After two or three homes, you will see how your costs changed with each move.
How do I do the sum in a sheet?
List the yearly lines in B2 to B6 and the area in B8. Then in B9 type =SUM(B2:B6)/B8. Divide by 12 for a monthly view with =SUM(B2:B6)/B8/12. If you already categorise your housing payments in SpendixAI, you can total the year in the Report builder and read the number off, rather than adding bills by hand.
Does the figure change from year to year?
Yes. Rent rises, society charges are revised, repair years differ from quiet years. Work it out every year for the same home, on the same list, and you get a trend. A figure that jumps because of one big repair should be read with that repair in mind, so write a short note beside each year saying what was unusual.
Before you move
- Work out this figure for your current home.
- Ask for the rent, maintenance and utility estimate for the new one.
- Use the same area measure.
- Compare, then add the one-time costs of moving.
Useful ideas start with a clearer picture of your own spending.
Explore your reports

